CONTACT US
Our Information
How to reprogram the rear buttons:
1. Programmable Remapper
Using the PS5 Programmable Remapper:
- In order to use the rear back buttons/ paddles, you must first Enter the “programming” mode.
- To do this, the following key combination must be held together, as long as possible, until the LED lights up continuously white (about 3 seconds):
- L1 + R1 + square + D-pad right
- Then you hold the back button/ paddle button and the Controller button you want to map at the same time, until the indicator LED goes out (about 3 seconds) •
- After the LED went out, the button/ paddle has been mapped, and you then need to repeat this step to map the other buttons/ paddle buttons.
2. Using Pre-set mode:
Saving Presets:
- So that you can quickly switch between different back button mappings on the fly, pre-sets can be saved.
- You can save up to 4 Presets.
- To do this, the following key combination must be held together, as long as possible, until the LED lights up continuously white (about 3 seconds)
- L1 + R1 + triangle + D-pad Right
- Then you hold either: X, O, triangle or the square button until the indicator LED stops blinking.
- You then need to follow step 1 above to set your back buttons for your preset.
- A preset can be saved on each of the four Face buttons mentioned.
- For example, you can save a different preset under X, Circle, Square and Triangle.
- To switch between presets, you will need to hold
- L1 + R1 + triangle + D-pad Right, until the LED lights up continuously white (about 3 seconds)
- Then you hold either: X, O, triangle or the square button until the indicator LED stops blinking. For example, if you have held down X, you have now chosen the X preset back button mapping, follow the step to change to the Circle, Triangle or Square presets.
If you need any assistance, please call, text or whatsapp us on 07783133177, email us at support@novagamingcontrollers.com or complete the below contact form.
What is controller aftercare?
Controller aftercare is how you take care of your new controller to ensure it stands the test of time.
Ways you can look after your new controller:
Do not hit, throw or smash the controller.
Do not use excessive force when pressing buttons/paddles.
Do not charge the controller with devices not recommended by the official manufacturer (SONY).
Ensure hands are clean before using the controller to prevent debris build up on/within the controller.
Store the controller safely by unplugging any wires and leaving it in a secure space to prevent dropping or pulling the controller off of your gaming space.
Do not consume food or drink whilst using the controller to prevent any water damage (water damage also voids your warranty with Nova Gaming Controllers).